Products

Balanced (Multi-orifice) Flow Sensor — BF00

BF00 balanced flow sensor improves on conventional throttling devices with a multi-functional-orifice plate that rectifies the flow field into an almost ideal profile, delivering 5–10× better accuracy than an orifice plate. Suitable for nearly all fluids, bidirectional flow and heavy-duty industrial service.

Orifice Plate Flow Sensor — BF01

The orifice plate is the most widely used flow meter in history. BF01 is a standard throttling DP element manufactured and sized to international standards, covering DN15–DN1000+ with pressures up to 64 MPa and temperatures from -185 °C to +850 °C. Simple, reliable, low cost and maintenance-free.

Venturi Tube Flow Sensor — BF05

BF05 Venturi tube is a standard throttling DP device developed from the Venturi effect. Its tapered geometry is free from the sharp-edge wear and fouling that plague orifice plates, and actively re-rectifies the velocity profile for high-stability measurement — ideal for dirty media and large lines at high pressure and temperature.

Averaging Pitot Tube Flow Sensor — BF10

BF10 averaging pitot tube combines a low-pressure-loss DP principle with an insertion style. The aerodynamic water-drop (teardrop) section minimizes drag, multiple tapping ports sense the true average velocity, and total pressure loss is only ~3% of the measured ΔP (vs. 60% for an orifice plate). Built as a one-piece monolithic metal cavity — ideal for large lines and online installation.

Nozzle Flow Sensor — BF15

BF15 nozzle is a standard throttling DP device with a long, proven history. Its smooth convergent profile offers low straight-run requirements, low permanent pressure loss and strong resistance to fouling, making it a preferred element for steam, gas and high-pressure/temperature service.

Wedge Flow Sensor — BF20

BF20 wedge flow sensor fills the long-standing gap in metering city gas and natural gas with sharply varying flow (tens of times over time), and breaks through the measurement of high-viscosity liquids such as tar, asphalt, residual oil, paraffin oil and crystallizing oils, as well as strongly corrosive saturated/oversaturated acid, alkali and salt solutions.

Rectangular Flow Sensor — BF20R

BF20R rectangular flow sensor combines features of the wedge and Venturi meters with clear improvement at the key performance points. No moving parts, wear-resistant and long-term stable accuracy — a solution for high-viscosity and particle-laden media where conventional meters clog or wear out.

V-Cone Flow Sensor — BF30

BF30 V-Cone is a high-accuracy flow sensor for a wide range of media and service conditions, covering Reynolds numbers from 8×10³ to 5×10⁶. The cone element re-rectifies the velocity profile and creates a stable low-pressure zone immediately downstream, giving short straight-run requirements and a wide turndown.

Bent Pipe Flow Sensor — BF35

BF35 bent pipe (elbow) flow sensor generates differential pressure from the centrifugal force of fluid moving through a bend — a standard throttling device with no inserted elements and therefore zero additional pressure loss. Available as 90°, 135° elbow replacements and a 180° straight-line element.

Electromagnetic Flow Meter — BF40

BF40 electromagnetic flow meter is a continuously upgraded high-precision, high-reliability product at the international level in excitation, lining and intelligence technology. It measures the volumetric flow of conductive liquids — acids, alkalis, salts, slurries, pulp and waste water — with no moving parts, no pressure loss and high corrosion resistance. In integral or remote design; flanged, wafer, hygienic or insertion.

Vortex Shedding Flow Meter — BF50

BF50 vortex flow meter measures liquids, gases and steam (saturated and superheated) via Kármán vortex shedding. The passive smart version suits sites without a power supply; the remote version works with displays, controllers and computers. With temperature/pressure compensation modules it outputs accurate mass flow for steam and gas.

Precession Vortex Flow Meter — BF50R

BF50R precession vortex flow meter is a new-generation gas meter with high commonality of parts, SMT circuits and high reliability. Used mainly for gas: natural gas, compressed air, coal gas and liquefied gas. The vortex generator forces the axial flow into rotation, forming a vortex core that precesses; the oscillation frequency is proportional to volumetric flow.

Thermal Mass Gas Flow Meter — BF60

BF60 thermal mass flow meter is dedicated to gases and measures mass flow directly without temperature or pressure compensation. Suitable for air, natural gas, flue gas, blast-furnace gas and various process gases, in in-line or insertion (large bore) form. Huge turndown up to 100:1 and can measure very small gas flows.

Liquid Ultrasonic Flow Meter — BF70-1

BF70-1 liquid ultrasonic flow meter works mainly on the transit-time (time-difference) method: ultrasonic transducers upstream and downstream transmit alternately, and the flow velocity is derived from the difference in transit times. Available as in-line, clamp-on (no pipe cutting) and insertion. No moving parts, no pressure loss; the clamp-on form is ideal for retrofit and large pipes.

Gas Ultrasonic Flow Meter — BF70-2

BF70-2 gas ultrasonic flow meter is designed specifically for gas — natural gas, compressed air and flue gas. Multi-path design improves accuracy; gas sound velocity varies with temperature and pressure, which the algorithm compensates for. Widely used for custody transfer in gas metering.

Coriolis Mass Flow Meter — BF80

BF80 Coriolis mass flow meter directly measures mass flow, medium density and temperature in one device — no pressure or temperature compensation needed. Works on liquids, gases and some two-phase flows and is widely used for custody-transfer metering. Ex d ia IIC T6 Gb rated; hygienic clamp versions for food and pharma.